The bookbinding project is challenging and it requires a certain understanding of it. Among them, using the right glue for binding is an important task that you cannot ignore.
Any book binding specialist understands the importance of glue a book binding. The best glue book binding will help you make an effective and durable binding. Using the right glue won’t ruin your book either.
However, there are many glue used for book binding, but not all products are of good quality. Beginners may find it difficult to choose a perfect glue book binding for their project.
Below is a list of best glue on book binding and you can choose one that is right for your project.
Table of Contents
- Top 8 Best Glue Book Binding 2020 [Review]
- #1 Gorilla 2 Part Epoxy (Editor’s Choice)
- #2 Elmer’s E431 Craft Bond Fabric and Paper Glue
- #3 Books by Hand pH Neutral PVA Adhesive
- #4 EURO TOOL Devcon Epoxy, 5 Minute Epoxy
- #5 Lineco Books by Hand pH Neutral Adhesive (Best Rated)
- #6 Gaffer Power Bookbinding Tape
- #7 Koltose by Mash Bookbinding Tape
- #8 DAP 102 Contact Cement, TAN
- Related To Glue Book Binding
Top 8 Best Glue Book Binding 2020 [Review]
#1 Gorilla 2 Part Epoxy (Editor’s Choice)
Gorilla is a very famous manufacturer with a wide variety of quality glues and you must have heard of this name at least once. They are very reputable and the glues from them receive a lot of positive reviews from customers.
This Gorilla glue book binding is a 2-part Epoxy adhesive, it works well on most materials, including paper and cardboard. You can use it to bind a new book or use it as an glue to repair book binding.
This glue has a very strong, fast bond and is permanent. It also effectively fills gaps. When working with thin paper, it does not deform or destroy the material.
It is a good book binding glue when it comes to binding books or hardcover with just a small amount of glue.
It comes with a syringe containing 2 parts and evenly distributes both. This syringe is very easy to apply to the material surfaces, and importantly it does not cause any tangles or stick to your hands.
The book binding glue dry time is approximately 5 minutes. During this time you can still make your final edits. After the glue dries, it leaves no residue on the book.
However, if anyone is not used to using syringes, it will be difficult to control the right amount of glue.
#2 Elmer’s E431 Craft Bond Fabric and Paper Glue
Elmer’s is also a reputable manufacturer with outstanding glues. They know how to please their customers. And this Elmer’s glue book binding is an option that you should immediately add to your preferences.
This glue is a popular choice for paper and fabric crafting projects. It works extremely effectively on these two materials and is also safe for the skin.
It also comes at a low price when you can get a premium 4-ounce bottle for use in many of your craft projects. 4 ounces is also enough for you to effectively bind multiple books.
It has a precise and pointed tip, allowing you to apply the glue to a variety of positions with the right amount of adhesive and adjustable according to the force. The cap fits snugly to ensure the glue doesn’t dry out after use.
This adhesive is very durable and strong bonding, it has a quick drying time but still gives you time for the final fixation. It leaves no colored residue on paper or cardboard.
In particular, this glue of book binding is water-resistant, so it is ideal for use in your projects.
However, this glue has a slight odor and many customers find it annoying.
#3 Books by Hand pH Neutral PVA Adhesive
Books by Hand, although not as well known as its two previous producers, is definitely a worthy competitor to this PVA glue book binding. It is a safe glue that works well on your bookbinding project.
This PVA glue is also used by many professional bookbinders. It is very safe, contains no acids or any other ingredients that could destroy layers of paper and your project. When this glue dries, it does not become brittle or leave a residue color like some other glues.
It is a water-soluble adhesive, which allows this glue to dissolve completely in water, consistently. You can mix this glue with water and that will help prolong the drying time of the glue.
If you have to work with large covers and have complicated manipulation, this feature is a big plus.
This 8-ounce bottle of glue comes at a reasonable price and you can find it easily at many local stores or on Amazon.
However this cap does not work well and it can leak, some customers think their glue dries out quickly due to the cap.
#4 EURO TOOL Devcon Epoxy, 5 Minute Epoxy
This is another good glue for book binding that we think should be on this list. It is an Epoxy adhesive from EURO TOOL and received a lot of positive reviews from customers.
This adhesive is an extremely strong binder that is also very versatile when it comes to working with a variety of materials. It can bond ceramic, porcelain, metal, glass, wood well, and of course paper and cardboard.
It comes with 2 separate ingredient jars, and for this glue to work properly, you need to mix these 2 jars together. Each jar contains 4.5 ounces and they are enough for you to use in many large projects.
When you combine these 2 components, you will get a strong adhesive mixture and very durable. When the glue dries, it creates a transparent layer, leaves no residue and doesn’t affect the book’s aesthetics.
However, you will need a tool to be able to mix the two components of glue together. And it’s going to be a bit messy and wasteful too.
#5 Lineco Books by Hand pH Neutral Adhesive (Best Rated)
This is the glue book binding that has received the highest rating from its customers, and it has almost absolute reviews on Amazon and many other e-commerce sites. Artisans are completely satisfied with the friendliness and effectiveness of this glue.
It is a high quality adhesive that adhesion very well to paper materials. The special thing about this glue is that when it dries, it does not create a grainy residue left on the surface of paper or paperboard. The glue after drying is very smooth and does not affect the aesthetics of the book.
Especially, this glue is water resistant after drying and it never stains. It also does not become brittle and rupture after a while.
This glue is also water soluble and if you need its drying time longer then do it this way. This will give you more editing time before the glue dries, especially when you attach cardboard to your book.
It does not contain acids or harmful chemicals that could harm your skin if the glue sticks to your hands. It’s also very material-friendly and doesn’t destroy your project.
However, this glue is significantly more expensive than other book binding glues. But it is worth the investment compared to the efficiency and quality it offers.
#6 Gaffer Power Bookbinding Tape
This book binding tape and glue from Gaffer Power is a quick and simple way to fix your favorite books. It is especially suitable for those who do not have much experience in using glue or are not skillful in it.
This tape for book binding is made in the USA, with clear origin and guaranteed material source. It is specialized for use with paper materials, mainly for repairing books.
It has a smooth surface, adhesion well and will keep your book intact for a long time. It can withstand heat and humidity. Any effect of temperature or humidity cannot destroy its bond.
Besides, this tape can also work with many different materials with many functions. It is very versatile when you can use it to mark surfaces, glue edges, etc.
Its good adhesion allows it to work with a variety of materials. It also won’t melt or dry after a while. With this tape, don’t mess with your project at all.
However, this tape is only suitable for use with blank books, the same color tone as it. It is best to keep it away from the old books.
#7 Koltose by Mash Bookbinding Tape
This bookbinding tape from Koltose by Mash is also a good choice for your own book repair project. This tape will save you a lot of money when you don’t have to buy a new book. This tape itself also comes with a cheap price tag.
With its super strong adhesive capabilities, this tape will confidently turn your book like new. It is a super adhesive adhesive tape that binds the cardboard well to paper and many other materials well.
This tape is made from ultra-fine fabric with a smooth surface that does not affect the book’s aesthetics. It will make it possible to attach the cover to the book without mixing any complicated glue formulas. It also doesn’t cause clutter and saves you time.
Remember, once you attach the tape to paper or paperboard, you will not be able to remove it. It is also unaffected by high temperature or humidity.
However, many people find that this tape is not of uniform quality between production. But this manufacturer has a full refund policy if you’re not satisfied with their product. Worth a try!
#8 DAP 102 Contact Cement, TAN
If you want to find a glue book binding that has a permanent bond, no glue is stronger than this contact cement. This contact cement from DAP will definitely make your project with paper and cardboard more durable than ever.
This product can work well with all types of paper, cardboard or thin cardboard. It is also ideal for bonding plastic laminates and many other materials such as Micarta.
It comes with 1 ounce bottle, enough for you to fix or bind any book. There’s no need to waste time preparing or mixing, it’s ready to go immediately after opening the lid. It comes with an applicator tip so you can apply adhesive to any spot.
This tape is very durable and very resistant to temperature, pressure and humidity. It is also resistant to water and certain chemicals.
The drying time of this adhesive is quite fast. So you do not need to use accelerants to dry them completely.
However, this quick drying time can also be considered a downside as you cannot make final edits to your book.